The Bromic Low Clearance Recess Kit for Marine 4500w

• Manufacturer: Bromic Heating
• Series: Electric Platinum Marine 4500 watt
• Model Number: BH362301-3
• 316 Stainless Steel
• UL Certified
• Size: 61" x 12.4" x 7.1"

Note: Heater not included

Bromic Heat Deflector is dual-layer stainless steel deflectors that significantly reduce the clearance needed between the top of a heater and the surface about it by absorbing heat that would otherwise escape vertically.

• Manufacturer: Bromic Heating
• Model Number: BH3030012

Fits:

• Tungsten 500 Gas Heaters

The Bromic Marine Grade Ceiling Recess Kit 

• Manufacturer: Bromic Heating
• Series: Platinum Electric Marine 4500watt
• Model Number: BH362300-1
• Fits: Marine Grade Platinum 4500watt
• 304 Stainless Steel

The Bromic Tungsten Electric Ceiling Recess Kit

• Manufacturer: Bromic Heating
• Model Number: BH8180010
• Color: Black
  

Fits:

• Tungsten 2,000 Watt Electric Heaters
• Tungsten 4,000 Watt Electric Heaters

**Note: Heater not included

The Bromic Ceiling Bracket Kit for Gas Mart-Heat Heaters

• Manufacturer: Bromic Heating
• Model Number: BH3030009-1
• Series: Platinum Gas Smart Heat & Tungsten Gas Smart Heat
• Includes: Brackets, Paddles & Screws

With the Bromic Ceiling Mount pole you can mount two heater units back-to-back beneath flat or pitched ceilings. 
Optimize your heater unit heights with pre- cut kits available in 7.9″ increments between 9.7″ and 3’5″ in length, for use when ceilings are between 10’6″ and 13′ above the floor.

• Manufacturer: Bromic Heating
• Model Number: BH3030008
• Size: 41.18" (1046mm)
• For: 13'1" (4m) Ceiling Height

For:

• Platinum Gas Heaters
• Tungsten Gas Heaters

With Bromic's Ceiling Mount pole you can mount two heater units back-to-back beneath flat or pitched ceilings.
Optimize your heater unit heights with pre- cut kits available in 7.9″ increments between 9.7″ and 3’5″ in length, for use when ceilings are between 10’6″ and 13′ above the floor.

• Manufacturer: Bromic Heating
• Part Number: BH3030003
• Size: 9.69" / 246mm
• For 10'6" (3.2m) Ceiling

Fits: 

• Platinum Gas Heaters
• Tungsten Gas Heaters

Bromic Heat Deflector is dual-layer stainless steel deflectors that significantly reduce the clearance needed between the top of a heater and the surface about it by absorbing heat that would otherwise escape vertically.

• Manufacturer: Bromic Heating
• Model Number: BH3030002-1

Fits:

• Platinum 500 Gas Heaters

The Bromic 4ft. Tube Suspension Kit for 4500w Heaters

• Manufacturer: Bromic Heaters
• Series: Platinum Electric Marine 4500w
• Model Number: BH3623023
• Length: 4ft (1200mm)
• 316 Stainless Steel

Fits:

• Platinum Electric - Marine Series - 4,500 watt Electric Heaters

Note: Heater not included

The Bromic Platinum Marine 2ft. Tube Suspension Kit for 2300w & 3400w Heaters

• Manufacturer: Bromic Heating
• Series: Platinum Electric Marine Grade
• Model Number: BH3130047
• Length: 4ft. (1200mm)
• 316 Stainless Steel

Fits:

• Platinum Electric Marine Heaters - 2300watts
• Platinum Electric Marine Heaters - 3400watts

Note: Heater not included

The Bromic 2ft. Tube Suspension Kit for Platinum Marine 4500w Electric Heaters

• Manufacturer: Bromic Heating
• Series: Platinum Electric Marine 4500watt
• Model Number: BH3623022
• Length: 2 feet (600mm)
• 316 Stainless Steel

Fits: 

• Platinum Marine Electric Heater - 4500 watts

Note: Heater not included

The Bromic Platinum Marine 2ft. Tube Suspension Kit for 2300w & 3400w Heaters

• Manufacturer: Bromic Heating
• Series: Platinum Electric Marine Grade
• Model Number: BH3130046
• Length: 2 feet (600mm)
• 316 Stainless Steel

Fits:

• Platinum Electric Marine Heaters - 2300watts
• Platinum Electric Marine Heaters - 3400watts

Note: Heater not included

The Bromic 4ft. Tube Suspension Kit for Platinum Electric 4500w Heaters

• Manufacturer: Bromic Heaters
• Series: Platinum Electric 4500w
• Model Number: BH3623021
• Length: 4ft (1200mm)
• 304 Stainless Steel

Fits:

• Platinum Electric - 4,500 watt Electric Heaters

Note: Heater not included

The Bromic 2ft. Tube Suspension Kit for Platinum Electric 4500w Heaters

• Manufacturer: Bromic Heaters
• Series: Platinum Electric 4500w
• Model Number: BH3623020
• Length: 2ft (600mm)
• 304 Stainless Steel

Fits:

• Platinum Electric - 4,500 watt Electric Heaters

Note: Heater not included

The Platinum Low Clearance Recess Ceiling Kit

• Manufacturer: Bromic Heating
• Model Number: BH3623008
• Series: Platinum Marine Grade
• Stainless Steel
• Bracket Only (heater sold separately)

Fits:

• Platinum - 3,400 Watt Electric Heater

The Platinum Low Clearance Recess Ceiling Kit

• Manufacturer: Bromic Heating
• Model Number: BH3623009
• Series: Platinum Marine Grade
• Stainless Steel
• Bracket Only (heater sold separately)

Fits:

• Platinum - 2,300 Watt Electric Heater

The Platinum Low Clearance Recess Ceiling Kit

• Manufacturer: Bromic Heating
• Model Number: BH3623011
• Series: Platinum Marine Grade
• Stainless Steel
• Bracket Only (heater sold separately)

Fits:

• Platinum Marine Grade - 2,300 Watt Electric Heater

The Platinum Low Clearance Recess Ceiling Kit

• Manufacturer: Bromic Heating
• Model Number: BH3623010
• Series: Platinum Marine Grade
• Stainless Steel
• Bracket Only (heater sold separately)

Fits:

• Platinum Marine Grade - 3,400 Watt Electric Heater

The Ceiling Recess Kit for the Bromic Tungsten White Electric Heaters

• Manufacturer: Bromic Heating
• Model Number: BH8180095
• Series: Tungsten Electric
• Color: White
• Bracket Only (heater sold separately) 

Fits: 

• Tungsten Electric 3,000 Watt Heater
• Tungsten Electric 6,000 Watt Heater

The Ceiling Recess Kit for the Bromic Tungsten White Electric Heaters

• Manufacturer: Bromic Heating
• Model Number: BH8180096
• Series: Tungsten Electric
• Color: White
• Bracket Only (heater sold separately) 

Fits: 

• Tungsten Electric 2,000 Watt Heater
• Tungsten Electric 4,000 Watt Heater

The Eclipse Wall Mount Post & Bracket

• Manufacturer: Bromic Heating
• Part Number: BH3230006
• Wall Mount Bracket Included
• Wall Mount Pole Included

Fits:

• Eclipse Electric Heater

**Note: Heater Sold Separately

The Eclipse 24" Twin Straight Ceiling Pole

• Manufacturer: Bromic Heating
• Part Number: BH3230003
• 24" Long (600mm)
• Twin Straight Pole
• Pole Mount Only

Fits:

• Eclipse Electric Heaters

**NOTE: Heater Sold Separately 

The Eclipse 24" Curved Ceiling Pole Mount

• Manufacturer: Bromic Heating
• Part Number: BH3230004
• 24" Long (600mm)
• Curved
• Pole Mount Only

Fits:

• Eclipse Electric Heaters

**NOTE: Heaters Sold Separately 

The Eclipse 8" Straight Ceiling Pole Mount

• Manufacturer: Bromic Heating
• Part Number: BH3230001
• 8" Long (220mm)
• Straight
• Pole Mount Only

Fits:

• Eclipse Electric Heaters

**NOTE: Heater Sold Separately

The Bromic Eclipse 48" Straight Ceiling Pole

• Manufacturer: Bromic Heating
• Part Number: BH3230005
• 48" Long (1,200mm)
• Straight
• Pole Only

Fits:

• Eclipse Electric Heater

**NOTE: HEATER NOT INCLUDED

The Bromic Ceiling Recess Kit for 3,000 & 6,000watt Tungsten Heaters

• Manufacturer: Bromic Heating
• Model Number: BH8180011
• Series: Tungsten Electric Heaters
• Low Clearance Ceiling Recess Kit

Fits:

• Tungsten 3,000 Watt Electric Heaters
• Tungsten 6,000 Watt Electric Heaters

• Manufacturer: Bromic Heaters
• Part Number: BH3130017
• Stainless Steel

Fits:

• Platinum Electric Marine 2,300 Watt Heater

Note: Heater Not Included, Sold Separately!

With the Bromic Ceiling Mount pole you can mount two heater units back-to-back beneath flat or pitched ceilings. 
Optimize your heater unit heights with pre- cut kits available in 7.9″ increments between 9.7″ and 3’5″ in length, for use when ceilings are between 10’6″ and 13′ above the floor.

• Manufacturer: Bromic Heating
• Model Number: BH3030006
• Size: 25.43" (646mm)
• For: 11'10" (3.6m) Ceiling Heights

Fits:

• Platinum Gas Heaters
• Tungsten Gas Heaters

With the Bromic Ceiling Mount pole you can mount two heater units back-to-back beneath flat or pitched ceilings. 
Optimize your heater unit heights with pre- cut kits available in 7.9″ increments between 9.7″ and 3’5″ in length, for use when ceilings are between 10’6″ and 13′ above the floor.

• Brand: Bromic Heating
• Part Number: BH3030005
• Size: 17.56" / 446mm
• For: 11'2" (3.4m) Ceiling Height

Fits:

• Platinum Gas Heaters
• Tungsten Gas Heaters

With Bromic's Ceiling Mount pole you can mount two heater units back-to-back beneath flat or pitched ceilings. 
Optimize your heater unit heights with pre- cut kits available in 7.9″ increments between 9.7″ and 3’5″ in length, for use when ceilings are between 10’6″ and 13′ above the floor.

• Manufacturer: Bromic Heating
• Model Number: BH3030004
• Size: 13.62"/ 346mm
• For 10'10" (3.3m) Ceiling Heights

Fits:

• Platinum Gas Heaters
• Tungsten Gas Heaters

The Bromic Heating Marine Grade Ceiling Recess Kit for 3400W Heaters

• Brand: Bromic Heating
• Part Number: BH3130035
• Stainless Steel
• Mount Only, heater not included

Fits:

• Platinum Electric Marine 3,400 Watt Heaters

The Bromic Heating Marine Grade Ceiling Recess Kit for 2300W Heaters

• Brand: Bromic Heating
• Part Number: BH3130034
• Series: Platinum Electric 2300W Marine Grade Heaters
• Mount Only, heater not included
• Stainless Steel

Fits:

• Platinum Electric Marine 2,300 Watt Heaters 

The Bromic Wall Bracket Assembly Controls

Provides a custom mounting solution for your Bromic Heater. This bracket allows for easy mounting onto a wall in your outdoor space. Featuring a low-profile black finish, this mounting solution integrates with your Platinum or Tungsten series gas heater for a heavy-duty, long-lasting installation. 

• Manufacturer: Bromic Heaters
• Model Number: BH8080001-1
• Wall Bracket & Controls in 1 Assembly

Fits:

• Platinum 300 Gas Heaters
• Platinum 500 Gas Heaters
• Tungsten 300 Gas Heaters
• Tungsten 500 Gas Heaters

Bromic Heat Deflector is dual-layer stainless steel deflectors that significantly reduce the clearance needed between the top of a heater and the surface about it by absorbing heat that would otherwise escape vertically.

• Manufacturer: Bromic Heating
• Model Number: BH3030011

Fits:

• Tungsten 300 Gas Heaters

With the Bromic Ceiling Mount pole you can mount two heater units back-to-back beneath flat or pitched ceilings. 
Optimize your heater unit heights with pre- cut kits available in 7.9″ increments between 9.7″ and 3’5″ in length, for use when ceilings are between 10’6″ and 13′ above the floor.

• Manufacturer: Bromic Heating
• Model Number: BH3030007
• Size: 33.31" (846mm)
• For: 12'6" (3.8m) Tall Ceilings 

Fits:

• Platinum Gas Heaters
• Tungsten Gas Heaters

Bromic Heat Deflector is dual-layer stainless steel deflectors that significantly reduce the clearance needed between the top of a heater and the surface about it by absorbing heat that would otherwise escape vertically.

• Brand: Bromic Heating
• Part Number: BH30300011

Fits:

• Platinum 300 Gas Heaters