• Manufacturer: Bromic Heating
• Model Number: BH0110003-1 OR BH0110004-1
• Series: Platinum 500 Gas
• Gas Type: Natural Gas or Propane Gas
• 5 Ceramic Infrared Burners
• Heat Output: 39,800 BTU's
• Heat Area: 215 Sq. Ft.
• 1/2" NPT Size Fittings
• Electronic Ignition
• Voltage: 110V 50/60Hz
• Amps: 2 Aps
• Product Dimensions: 29.8" wide X 12" high
• ETL & CETL Approved
  
• Standard Wall Mount Included
• 44lbs
• 5 Year Warranty

• Manufacturer: Bromic Heating
• Model Number: BH0110001-1 or BH011002-1
• Series: Platinum 300 Gas
• Gas Type: Natural Gas or Propane Gas
• 3 Ceramic Infrared Burners
• Heat Output: 23,600 BTU's
• Heat Area: 160 Sq. Ft.
• 1/2" NPT Size Fittings
• Electronic Ignition
• Voltage: 110V 50/60Hz
• Amps: 2 Amps
• Product Dimensions: 22.1" wide X 12" high
• 33lbs.
  
• ETL & CETL Approved
• Standard Wall Mount Included
• Minimum Floor Clearance: 96" 
• 5 Year Warranty

The Bromic Heating Wireless Controller has the ability to switch power supply to two separate outputs, enabling independent on/off control of two single-element heaters (2kW or 3kW), a single twin-element heater (4kW or 6kW) per unit, two gas heaters of your choice or up to four gas heaters controlled in groups of two. 

• Manufacturer: Bromic Heating
• Part Number: BH3130010-2
• Series: Wireless Controller
• Power Supply: 110/230VAC, 31A max, Single Phase
• Reception Frequency: 916MHz 
• Product Dimensions: 5.5" wide X 7" high

The Bromic Smart-Heat Link RS232 Plug-In

• Manufacturer: Bromic Heaters
• Model Number: BH3130097-1

With Bromic's Ceiling Mount pole you can mount two heater units back-to-back beneath flat or pitched ceilings.
Optimize your heater unit heights with pre- cut kits available in 7.9″ increments between 9.7″ and 3’5″ in length, for use when ceilings are between 10’6″ and 13′ above the floor.

• Manufacturer: Bromic Heating
• Part Number: BH3030003
• Size: 9.69" / 246mm
• For 10'6" (3.2m) Ceiling

Fits: 

• Platinum Gas Heaters
• Tungsten Gas Heaters

With the Bromic Ceiling Mount pole you can mount two heater units back-to-back beneath flat or pitched ceilings. 
Optimize your heater unit heights with pre- cut kits available in 7.9″ increments between 9.7″ and 3’5″ in length, for use when ceilings are between 10’6″ and 13′ above the floor.

• Manufacturer: Bromic Heating
• Model Number: BH3030008
• Size: 41.18" (1046mm)
• For: 13'1" (4m) Ceiling Height

For:

• Platinum Gas Heaters
• Tungsten Gas Heaters

With the Bromic Ceiling Mount pole you can mount two heater units back-to-back beneath flat or pitched ceilings. 
Optimize your heater unit heights with pre- cut kits available in 7.9″ increments between 9.7″ and 3’5″ in length, for use when ceilings are between 10’6″ and 13′ above the floor.

• Manufacturer: Bromic Heating
• Model Number: BH3030007
• Size: 33.31" (846mm)
• For: 12'6" (3.8m) Tall Ceilings 

Fits:

• Platinum Gas Heaters
• Tungsten Gas Heaters

With the Bromic Ceiling Mount pole you can mount two heater units back-to-back beneath flat or pitched ceilings. 
Optimize your heater unit heights with pre- cut kits available in 7.9″ increments between 9.7″ and 3’5″ in length, for use when ceilings are between 10’6″ and 13′ above the floor.

• Manufacturer: Bromic Heating
• Model Number: BH3030006
• Size: 25.43" (646mm)
• For: 11'10" (3.6m) Ceiling Heights

Fits:

• Platinum Gas Heaters
• Tungsten Gas Heaters

With Bromic's Ceiling Mount pole you can mount two heater units back-to-back beneath flat or pitched ceilings. 
Optimize your heater unit heights with pre- cut kits available in 7.9″ increments between 9.7″ and 3’5″ in length, for use when ceilings are between 10’6″ and 13′ above the floor.

• Manufacturer: Bromic Heating
• Model Number: BH3030004
• Size: 13.62"/ 346mm
• For 10'10" (3.3m) Ceiling Heights

Fits:

• Platinum Gas Heaters
• Tungsten Gas Heaters

With the Bromic Ceiling Mount pole you can mount two heater units back-to-back beneath flat or pitched ceilings. 
Optimize your heater unit heights with pre- cut kits available in 7.9″ increments between 9.7″ and 3’5″ in length, for use when ceilings are between 10’6″ and 13′ above the floor.

• Brand: Bromic Heating
• Part Number: BH3030005
• Size: 17.56" / 446mm
• For: 11'2" (3.4m) Ceiling Height

Fits:

• Platinum Gas Heaters
• Tungsten Gas Heaters

Bromic Heat Deflector is dual-layer stainless steel deflectors that significantly reduce the clearance needed between the top of a heater and the surface about it by absorbing heat that would otherwise escape vertically.

• Manufacturer: Bromic Heating
• Model Number: BH3030002-1

Fits:

• Platinum 500 Gas Heaters

Bromic Heat Deflector is dual-layer stainless steel deflectors that significantly reduce the clearance needed between the top of a heater and the surface about it by absorbing heat that would otherwise escape vertically.

• Brand: Bromic Heating
• Part Number: BH30300011

Fits:

• Platinum 300 Gas Heaters

Bromic has a great way to replace multiple bromic remote transmitter with just this one remote. Control up to 6 groups remotely and adjust each group independently. Includes a wall mounting bracket, screws and anchors. 

• Manufacturer: Bromic Heating
• Model Number: BH3130012-2
• Remote Only